Free FCP-WCS-AD-7-4 Fortinet FCP-WCS-AD-7-4 Practice Test Question

Question 1 (Topic 1)

An organization has the requirement to connect a data VPC to the on-premises infrastructure of a branch office in a hybrid cloud environment. The connectivity needs the higher bandwidth but the organization does not want to use multiple connections between sites. Which AWS solution meets the requirement?

Select an option, then click Submit answer.

○ Transit VPC with IPSec
○ Internet Gateway
○ Transit Gateway multicast
○ Transit Gateway Connect

Reference / correct answer:

Transit Gateway Connect

Most accepted answer: D. Transit Gateway Connect

Community votes: D=2

Selected Answer: D Study guide pages 61 trough 64 upvoted 1 times

Selected Answer: D The correct AWS solution to connect a data VPC to the on-premises infrastructure with higher bandwidth and without using multiple connections is: Transit Gateway Connect. Transit Gateway Connect provides a seamless connection between your on-premises network (such as through SD-WAN) and AWS using higher bandwidth with support for Generic Routing Encapsulation (GRE) and Border Gateway Protocol (BGP) for dynamic routing. It simplifies connectivity by creating a centralized transit gateway without needing multiple IPsec tunnels, making it ideal for hybrid cloud environments that require high bandwidth. upvoted 2 times myrmidon3 1 year, 9 months ago Here's why the other options are less suitable: Transit VPC with IPsec: While it can connect VPCs, it involves managing multiple VPN tunnels and does not offer the higher bandwidth performance of Transit Gateway Connect. Internet Gateway: This is used to provide internet access to VPCs but is not used for connecting on-premises networks to VPCs. Transit Gateway Multicast: This is used for multicast routing between VPCs and on-premises networks, but it doesn’t address the requirement for higher bandwidth or simpler connectivity. Thus, Transit Gateway Connect is the best solution for this scenario. upvoted 1 times ...

Here's why the other options are less suitable: Transit VPC with IPsec: While it can connect VPCs, it involves managing multiple VPN tunnels and does not offer the higher bandwidth performance of Transit Gateway Connect. Internet Gateway: This is used to provide internet access to VPCs but is not used for connecting on-premises networks to VPCs. Transit Gateway Multicast: This is used for multicast routing between VPCs and on-premises networks, but it doesn’t address the requirement for higher bandwidth or simpler connectivity. Thus, Transit Gateway Connect is the best solution for this scenario. upvoted 1 times

D - Correct. Study Guide 7.4 Page 58 upvoted 2 times

D - Correct. upvoted 1 times

Question 2 (Topic 1)

A customer has implemented GWLB between the partner and application VPCs. FortiGate appliances are deployed in the partner VPC with multiple AZs to inspect traffic transparently. Which two things will happen to application traffic based on the GWLB deployment? (Choose two.)

Select an option, then click Submit answer.

○ Inbound and outbound traffic will go to multiple devices, which will perform load balancing.
○ Inbound and outbound traffic will go to the same device, which will perform stateful processing.
○ The content of the original traffic exchanged between the GWLB and FortiGate will be preserved.
○ The original traffic exchanged between the GWLB and FortiGate will be hashed for data integrity.

Reference / correct answer:

Inbound and outbound traffic will go to the same device, which will perform stateful processing.

Most accepted answer: B. Inbound and outbound traffic will go to the same device, which will perform stateful processing.

Community votes: B=4, C=4

Selected Answer: BC GWLB ensures that traffic flows are sent to the same appliance to maintain stateful processing. This is critical for the functioning of stateful firewalls like FortiGate, which need to keep track of the state of connections to inspect traffic effectively. GLB and the virtual appliances exchange application traffic with other using GENEVE, which allows GWLB to preserve the content of the original traffic. upvoted 8 times

Selected Answer: BC Study guide pages 147 and 150. upvoted 1 times havokdu 1 year, 7 months ago Options A and D are incorrect: A: Suggesting that inbound and outbound traffic will go to multiple devices would break stateful processing. Instead, GWLB ensures that both directions of a flow end up at the same appliance. D: GWLB does not hash the original traffic content for data integrity. It uses flow-based hashing to ensure symmetrical routing, but the packet content itself remains intact and is not hashed for integrity checks in this manner. upvoted 1 times ...

Options A and D are incorrect: A: Suggesting that inbound and outbound traffic will go to multiple devices would break stateful processing. Instead, GWLB ensures that both directions of a flow end up at the same appliance. D: GWLB does not hash the original traffic content for data integrity. It uses flow-based hashing to ensure symmetrical routing, but the packet content itself remains intact and is not hashed for integrity checks in this manner. upvoted 1 times

Selected Answer: BC Inbound and outbound traffic will go to the same device, which will perform stateful processing: The Gateway Load Balancer (GWLB) in AWS ensures that traffic is forwarded to the same FortiGate device for stateful inspection. This ensures that the session remains intact during the processing. The content of the original traffic exchanged between the GWLB and FortiGate will be preserved: The GWLB uses the Generic Network Virtualization Encapsulation (GENEVE) protocol, which preserves the original traffic content during its transmission to and from the FortiGate device for inspection. These references confirm that GWLB ensures stateful traffic processing and preserves the content of the original traffic when exchanged between the GWLB and FortiGate appliances. upvoted 2 times

Selected Answer: BC B,C should be correct upvoted 4 times

Question 3 (Topic 1)

An organization has created a VPC with two subnets and deployed a FortiGate-VM (VM04/c4.xlarge) in AWS. The EC2 instance is initially configured with two Elastic Network Interfaces (ENIs). The primary ENI is configured on the public subnet, and the secondary ENI is configured on the private subnet. To provide internet access for the FortiGate-VM, they now want to associate an EIP to its primary ENI, but the assignment is failing. Which action would allow the EIP assignment to be successful?

Select an option, then click Submit answer.

○ Create and associate a public subnet with the primary ENI of the FortiGate VM, and then assign the EIP to the primary ENI.
○ Shut down the FortiGate VM, if it is running, assign the EIP to the primary ENI, and then power it on.
○ Create and attach an internet gateway to the VPC, and then assign the EIP to the primary ENI of the FortiGate VM.
○ Create and attach a public routing table to the public subnet, associate the public subnet with the primary ENI of the FortiGate VM, and then assign the EIP to the primary ENI.

Reference / correct answer:

Create and attach an internet gateway to the VPC, and then assign the EIP to the primary ENI of the FortiGate VM.

Most accepted answer: C. Create and attach an internet gateway to the VPC, and then assign the EIP to the primary ENI of the FortiGate VM.

Community votes: C=2

Selected Answer: C C. Create and attach an internet gateway to the VPC, and then assign the EIP to the primary ENI of the FortiGate VM. To successfully assign an Elastic IP (EIP) to the primary ENI of a FortiGate-VM instance, the VPC needs to have an internet gateway (IGW) attached. The IGW enables internet access for instances in public subnets, and without it, EIP assignment will fail. Once the internet gateway is attached to the VPC, you can assign the EIP to the primary ENI of the FortiGate VM. Here’s why the other options are incorrect: A: If the VPC already has a public subnet, associating it again won’t resolve the issue of needing an internet gateway. B: Shutting down the VM is not necessary for EIP assignment. The key requirement is attaching an internet gateway. D: A public routing table directs traffic to the internet gateway, but the VPC still needs an internet gateway to route traffic outside the VPC. upvoted 1 times

Selected Answer: C For me C, it make sense to creat and attach an IGW before attaching an ENI as it needs INET to work. upvoted 1 times D10SJoker 1 year, 10 months ago Correction* : For me C, it make sense to me create and attach an IGW before attaching an EIP as it needs INET to work. upvoted 1 times ...

Correction* : For me C, it make sense to me create and attach an IGW before attaching an EIP as it needs INET to work. upvoted 1 times

Free FCP-WCS-AD-7-4 – Fortinet FCP-WCS-AD-7-4 Practice Test Question