Refer to the exhibits. Exhibit A - Exhibit B - Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status. The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule. Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?
Select an option, then click Submit answer.
Reference / correct answer:
The traffic will be routed over T_INET_1_0.
Most accepted answer: B. The traffic will be routed over T_INET_1_0.
Community votes: B=5, D=2
Selected Answer: B set default isn't enabled, and the default value of "set default" is disabled upvoted 1 times
Selected Answer: D When you use "set gateway enable" in a FortiGate SD-WAN member configuration, it bypasses the usual FIB lookup process. Instead of relying on the forwarding information base to determine the next-hop based on the destination IP, the device uses the explicitly configured gateway address from the SD-WAN member settings. This provides more predictable routing behavior and ensures that traffic is directed through the intended gateway, regardless of what the routing table might otherwise dictate upvoted 2 times 1d21e23 1 year, 3 months ago "set default" is still "disable", which means the requirement for a FIB best match which returns an sdwan member as the destination interface is still in place. upvoted 1 times ...
"set default" is still "disable", which means the requirement for a FIB best match which returns an sdwan member as the destination interface is still in place. upvoted 1 times
Selected Answer: D Services rule 1 set gateway enable, : this instructs Fortigate to skip the FIB lookup, and instead use the gateway address that you configured in the SD-WAN member settings ( PAG 173 7.2) upvoted 2 times
Selected Answer: B Routing for 10.0.0.0/8 is using T_INET_1_0 and T_INET_0_0. SLA shows that T_INET_1_0 has SLA0x1 which is better than SLA0x0 fot T_INET_0_0 upvoted 2 times
