Free 5V0-22-23 Vmware 5V0-22-23 Practice Test Question

Question 1 (Topic 1)

A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics. Which performance category should the vSAN administrator open?

Select an option, then click Submit answer.

○ Disks
○ Host Network
○ Resync Latency
○ Backend

Reference / correct answer:

Backend

Most accepted answer: D. Backend

Community votes: C=2, D=3

Selected Answer: C The vSAN administrator should open the Resync Latency performance category. This category provides specific metrics related to the speed and duration of object resynchronizations, which directly addresses the administrator's concern about resync operations taking longer than expected. The other options are less relevant: Disks would show general disk metrics (IOPS, throughput, latency) but not specifically resync operations. Host Network focuses on network traffic and health, not vSAN resync performance. Backend usually relates to I/O operations from VMs to the vSAN datastore, not the internal resynchronization process itself. upvoted 1 times

D) Backend Pg 30. https://docs.vmware.com/en/VMware-vSphere/7.0/vsan-703-monitoring-troubleshooting-guide.pdf Also confirmed in vCenter at work. "Latency" is a graph / metric under Backend. upvoted 1 times

D is the correct answer upvoted 1 times

Selected Answer: D Disk and host network performance categories are only visible at a host-level, not at the cluster level. There is no "resync latency" category : this is a simple metric. The right answer is D : Backend. Once you go in Monitor / vSAN / Performance / Backend, you can see all the resync metrics : Resync Read IOPS, Resync Read Throughput, Resync Read Latency upvoted 1 times

Selected Answer: C When a vSAN administrator wants to view resynchronizing metrics and is concerned about the duration of resynchronization processes, they should open the "Resync Latency" performance category. Resync latency metrics provide information about the time it takes for vSAN to synchronize objects within the cluster. Monitoring this category helps administrators understand the efficiency of resynchronization processes and identify potential issues that might be causing delays. So, the correct option is: C. Resync Latency upvoted 1 times DesolateMarauder 1 year, 12 months ago Latency is a graph / metric. upvoted 1 times ...

Question 2 (Topic 1)

What are two characteristics of the vSAN Data-At-Rest Encryption (DARE)? (Choose two.)

Select an option, then click Submit answer.

○ It requires Self-Encrypting Drives in order to work.
○ It needs to be enabled together with the vSAN Data-In-Transit encryption.
○ It is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes.
○ It is not supported on Stretched Cluster environments.
○ It continues to operate unaffected during downtime on vCenter Server.

Reference / correct answer:

It is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes.

Most accepted answer: C. It is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes.

Community votes: A=1, B=1, C=2, E=2

Selected Answer: CE C&E are correct. A: vSAN DARE can use SEDs, but the SED functionality must be disabled, as vSAN manages the software encryption B : Data-at-rest encryption can be enabled, while data-in-transit encryption is disabled. They are not linked. D : Yes, you can use vSAN encryption on stretched clusters upvoted 2 times

Selected Answer: CE Two characteristics of vSAN Data-At-Rest Encryption (DARE) are: It is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes . This means that it is not dependent on the type of drives used in the vSAN cluster, and can be enabled on any vSAN datastore. It continues to operate unaffected during downtime on vCenter Server . This means that even if vCenter Server is down, data-at-rest encryption continues to function normally. upvoted 3 times

Selected Answer: AB A. It requires Self-Encrypting Drives (SEDs) in order to work: vSAN DARE can utilize Self-Encrypting Drives (SEDs) to provide data-at-rest encryption. These drives have built-in encryption capabilities, which vSAN can leverage. However, it's important to note that vSAN also supports Software Encryption, which doesn't require SEDs. E. It continues to operate unaffected during downtime on vCenter Server: vSAN DARE is independent of vCenter Server and continues to operate unaffected during downtime or maintenance of the vCenter Server. It's a feature of the vSAN cluster and doesn't rely on vCenter for ongoing operation. upvoted 1 times trunghieuet 2 years, 3 months ago it's not correct upvoted 1 times ... ieee13940 2 years, 3 months ago I don't think self encrypting drives are a necessity to use this feature upvoted 2 times ...

it's not correct upvoted 1 times

I don't think self encrypting drives are a necessity to use this feature upvoted 2 times

Question 3 (Topic 1)

The DevOps team of an organization wants to deploy with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature. Which two requirements must the administrator meet to complete this task? (Choose two.)

Select an option, then click Submit answer.

○ A valid vSAN license for the vSAN cluster
○ vSphere HA enabled on the vSAN cluster
○ A dedicated network for vSAN Direct
○ An integration with vSAN File Services
○ Unclaimed disks in the hosts for vSAN Direct

Reference / correct answer:

A valid vSAN license for the vSAN cluster

Most accepted answer: A. A valid vSAN license for the vSAN cluster

Community votes: A=5, C=1, E=4

Selected Answer: AE https://www.virtualizationhowto.com/2022/08/vmware-vsan-direct-configuration-and-requirements/#:~:text=vSAN%20Direct%20allows%20you%20to,the%20disks%20in%20the%20hosts. upvoted 2 times

Selected Answer: AC A. A valid vSAN license for the vSAN cluster: A valid vSAN license is necessary to enable and use vSAN features, including vSAN Direct. C. A dedicated network for vSAN Direct: vSAN Direct requires a dedicated network to provide direct access to vSAN storage devices for virtual machines. This network is separate from the regular vSAN data network and is used for direct storage access. Options B, D, and E are not specific requirements for configuring vSAN Direct: upvoted 1 times

Selected Answer: AE ADD - https://4sysops.com/archives/how-to-configure-vmware-vsan-direct-on-vsphere-7-u1/ upvoted 2 times

Selected Answer: AE First of all, what are the requirements for VMware vSAN Direct configuration? You need to have a vSAN Data Persistence platform Only vSAN Data Persistence Platform providers can consume vSAN Direct storage. You need to have unclaimed disks outside of your vSAN datastore disk groups You need to create a vSAN storage policy to take advantage of vSAN direct storage https://www.virtualizationhowto.com/2022/08/vmware-vsan-direct-configuration-and-requirements/ upvoted 2 times

Selected Answer: AE AE - correct upvoted 4 times

Free 5V0-22-23 – Vmware 5V0-22-23 Practice Test Question