Free 5V0-22-23 Vmware 5V0-22-23 Practice Test Question - Page 2

Question 4 (Topic 1)

An architect is designing a vSAN stretched cluster and needs to ensure that data remains on a given site in case of a network partition between the sites. Which configuration would do this?

Select an option, then click Submit answer.

○ Preferred and secondary sites
○ vCenter High Availability
○ Distributed Resource Scheduler
○ vSphere High Availability

Reference / correct answer:

Preferred and secondary sites

Most accepted answer: A. Preferred and secondary sites

Community votes: A=3, C=1

Selected Answer: A A. This configuration allows you to designate one site as the "preferred" site where the data resides, while the "secondary" site serves as a failover option. In the event of a network partition, the data remains accessible on the preferred site, ensuring continued operation. Key Considerations: Site Affinity: With the preferred/secondary site configuration, you can manage where data is stored and how it behaves during failures. Data Accessibility: This setup helps maintain data availability and integrity during network issues, as it prevents data from being unavailable if a partition occurs. upvoted 2 times

Selected Answer: A The requirement here is to keep the data on a given site. So answer is A. The other answer have nothing to see with data placement, only VM or vCenter availability or placement. upvoted 2 times

Selected Answer: A To ensure that data remains on a given site in case of a network partition between sites in a vSAN stretched cluster, the architect could configure the preferred and secondary sites. This configuration establishes which site is preferred and ensures that the data remains on that preferred site unless communication between the sites is restored. Therefore, option A is the correct answer. This configuration can be helpful in maintaining data locality and minimizing the risks of inconsistencies in the stretched-cluster environment. upvoted 3 times

A is correct upvoted 2 times

Selected Answer: C C. https://docs.vmware.com/en/VMware-vSphere/8.0/vsan-planning/GUID-1BDC7194-67A7-4E7C-BF3A-3A0A32AEECA9.html upvoted 2 times

Question 5 (Topic 1)

An administrator has been tasked with upgrading existing vSAN OSA cluster hosts with a SSD cache device per host to a NVMe device (hot plug). Which fact should guide the administrator's action?

Select an option, then click Submit answer.

○ The disk group must be deleted on each physical host in the vSAN OSA cluster to use the NVMe device.
○ The disk group does not need to be removed before adding new cache.
○ The host must be removed from vSAN OSA cluster before changing cache devices.
○ The cache disk drives must have a larger capacity.

Reference / correct answer:

The disk group must be deleted on each physical host in the vSAN OSA cluster to use the NVMe device.

Most accepted answer: A. The disk group must be deleted on each physical host in the vSAN OSA cluster to use the NVMe device.

Community votes: A=1

Ans A is correct Replacing a Cache Disk A cache disk replacement requires the recreation of the entire disk group. To replace a cache disk in the vSAN environment: • Ensure there is adequate space to remove the disk group • If the cache disk is healthy, evacuate the data • If the cache disk isn't healthy, use no data migration • Replace the cache disk • Recreate the disk group upvoted 2 times

Selected Answer: A When using the vSAN OSA, replacing a Cache Device will always cause the disk group to be removed form the host with the data unrecoverable. A process to orderly perform this is as follows. 1. Click the Configure tab. 2. Under vSAN, click Disk Management 3. Under Disk Groups, select the disk group to remove, click …, and then click Remove. 4. Select Full data migration as a migration mode and click Yes. 5. Remove the physical Cache disks from the host. 6. Add the flash devices to the host. 7. Verify that no partitions exist on the flash devices. 8. Create the all-flash disk groups on that host. 9. Repeat the process one host at a time. The vSAN Express Storage Architecture in vSAN 8 does not use the construct of a disk group, or a dedicated caching tier. https://core.vmware.com/resource/vsan-frequently-asked-questions-faq#section12 upvoted 3 times

Question 6 (Topic 1)

A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant. Which action should the vSAN administrator take?

Select an option, then click Submit answer.

○ Immediately reboot the non-compliant hosts
○ Check VMKNICs, uplinks, physical switches, and associated settings
○ Rerun the VMware Skyline Health: vSAN Cluster Partition report
○ Place the non-compliant hosts into an isolated network partition

Free 5V0-22-23 – Vmware 5V0-22-23 Practice Test Question